전체상품목록 바로가기

본문 바로가기

Vibration Controller

기본 정보
상품명 Vibration Controller
제조사 I.M.V
원산지 일본
판매가 전화문의
수량 수량증가수량감소
SNS 상품홍보
SNS 상품홍보

개인결제창을 통한 결제 시 네이버 마일리지 적립 및 사용이 가능합니다.

상품 옵션
옵션선택

(최소주문수량 1개 이상 / 최대주문수량 0개 이하)

사이즈 가이드

수량을 선택해주세요.

위 옵션선택 박스를 선택하시면 아래에 상품이 추가됩니다.

상품 목록
상품명 상품수 가격
Vibration Controller 수량증가 수량감소 전화문의 (  0)
총 상품금액(수량) : 0 (0개)

할인가가 적용된 최종 결제예정금액은 주문 시 확인할 수 있습니다.

이벤트

Completely In-House Products

The vibration controller is a unit that faithfully enables and implements the tests that our customers need. IMV has always conducted all the development of all the hardware and software of this important system in-house. IMV strives to make complicated tests easy to do. The K2/L system offers enhanced functions and operability based on the most advanced technologies and incorporating feedback from our customers.

■User-friendly Interface

Simplified definition
General test definitions are executed by following instructions on the screen using “Simplified definition”.
Help
The enhanced Help screen explains meanings of phrases
and gives detailed descriptions of the system.

■Easy-to-use Functions

Web monitor
Web monitor allows the user to monitor excitation on screen using a LAN-based PC..
Report generator
Report generator saves test results and data graphs in Microsoft“ Word in any layout.

■Intelligent Control Capabilities

K2/L employs high-resolution 24 bit A/D and D/A converters to implement intelligent control capabilities.

■Enhanced Interlock Function

A hardware mute function immediately cuts off output signals independent of software control.
E-mail notification
Notification of any abnormality during excitation or termination of excitation will be sent to any e-mail addresses desired by the user.
Data saving
The K2/L outputs definitions and test results in CSV format.
 

■Installation

K2/L is compatible both with desks for office automation equipment and consoles. 

■Specifications

Console
Number of Slots
3(Can be incereased by connecting consoles)
AC Power Single-phase AC, 100V-240V (Auto-selected)
Extension Connection among the unit cases (Providing support for large-scale systems)
External Communication Contact I/O (for Emergency stop)
Ambient Conditions 0-40℃, below 85% RH, no condensation
Dimensions
430(W)x100(H)x360(D)mm
Mass
3.0Kg (Approx.)
8 ch. Input Module
Number of Chs.
8
Input Terminal BNC
Input Signal Charge or Voltage
Charge Amp. Sensitivity 1.0mV/pC or 10mV/pC
Charge Amp. Cut-off 0.32Hz
Max. Input Charge Input ±10000pC
Voltage Input ±10000mV
Sampling Freq. Max. 51.2kHz
Coupling AC or DC
Cut-off at AC Coupling 0.1Hz
A/D Converter  
Method :ΔΣmethod
Resolution :24-bit
Dynamic Range :115dB
Digital Filter :Ripple in pass band ±0.001dB
  :Rejection band attenuation quantity 110dB
Required PC Specification (Min.)
[PC Specificaiton] 32-bit CPU(faster than Intel Pentium III 800MHz) is recommended. PC must be IBM PC/AT or a compatible machine. (for a system with 4 input channels.) Recommended CPU clock speed increases dependant on the number of inpur channnels.
[Operating System] Later than Microslft Windows 2000SP1 or Windows XP
[Others] One expansion slot (full PCI Slot)
 
4ch.Input and 4 ch.Output Module
Input part  
Number of Chs. 4
Input Terminal BNC
Input Signal Charge or Voltage
Charge Amp. Sensitivity 1.0mV/pC or 10mV/pC
Charge Amp.Cut-off 0.32Hz
Max. Input Charge Input ±10000pC
Sampling Voltage Input ±10000mV
Coupling Max. 51.2kHz
Cut-off Freq.at AC Coupling AC or DC
A/D Converter  
0.1Hz  
Method :ΔΣmethod
Resolution :24-bit
Dynamic Range :115dB
Digital Filter :Ripple in pass band ±0.001dB
  :Rejection band attenuation quantity 110dB
Output part  
Number of Chs. 4(an channel is occupied for drive output)
Output Terminal BNC
Output Signal Voltage
Max. Output ±10000mV
Sampling Freq. Max. 51.2kHz
D/A Converter  
Method :ΔΣmethod
Resolution :24-bit
Dynamic Range :120dB
Digital Filter :Ripple in pass band ±0.001dB
  :Rejection band attenuation quantity 75dB
 
While inheriting all of the performance and features of the K2/L, the K2/L Sprint has improved cost-effectiveness with 2-channel hardware. K2/L Sprint is best suited to single monitor channel operation.
 

* 전화주문 : 031-704-2401 팩스주문 : 031-704-2421 메일주문 : aaa@a-a.co.kr

  입금계좌 : 국민은행 298737-04-004838  예금주 :아이에스테크주식회사


*카드결제는 홈페이지 상에서 지원되지 않습니다. 카드결제를 이용하실 분들은 031-704-2401로 연락 바랍니다.
 
     

DELIVERY

  • 배송 방법 : 택배 & 화물
  • 배송 지역 : 전국지역
  • 배송 비용 : 4,000원
  • 배송 기간 : 3일 ~ 7일
  • 배송 안내 :

    - 배송료 : 10만원 미만시 착불 발송 됩니다.

      배송여건이 어려운 섬지방의 경우와 제품의 무게등 배송상의 문제로 인해 배송비용은 추가 될 수 있습니다.

    - 퀵서비스 요청시 착불 배송이 원칙 입니다.

    - 택배 마감 시간은 오후 4시 입니다.

EXCHANGE INFO

- 물품 파손 및 기능상의 이상이 있을경우 즉시 당사로 연락하여 사고 접수 바랍니다.


- 재고품목의 단순 변심 및 사양변경에 따른 경우 왕복 배송비가 부담 됩니다.


- 수입발주품 및 주문제작품은 반품 및 교환이 원천 불가 하오니 주문시 충분한 사양 검토 바랍니다.

SERVICE INFO

A/S 서비스 신청은 신청서 다운로드 후 내용작성 후 동봉하여 발송 바랍니다.

게시물이 없습니다

글쓰기 목록

게시물이 없습니다

글쓰기 목록

HOME  COMPANY  AGREEMNET  PRIVACY  GUIDE

298737-04-004838

국민은행 / 아이에스테크주식회사

       

저희 쇼핑몰은 KG이니시스를 통해 안전거래를 위해
현금 등으로 결제시 구매안전서비스를 이용하실 수 있습니다