전체상품목록 바로가기

본문 바로가기

TI-MINIMAX 볼트텐션측정기

기본 정보
상품명 TI-MINIMAX 볼트텐션측정기
제조사 CHECKLINE
원산지 미국
판매가 전화문의
수량 수량증가수량감소
SNS 상품홍보
SNS 상품홍보

개인결제창을 통한 결제 시 네이버 마일리지 적립 및 사용이 가능합니다.

상품 옵션
옵션선택

(최소주문수량 1개 이상 / 최대주문수량 0개 이하)

사이즈 가이드

수량을 선택해주세요.

위 옵션선택 박스를 선택하시면 아래에 상품이 추가됩니다.

상품 목록
상품명 상품수 가격
TI-MINIMAX 볼트텐션측정기 수량증가 수량감소 전화문의 (  0)
총 상품금액(수량) : 0 (0개)

할인가가 적용된 최종 결제예정금액은 주문 시 확인할 수 있습니다.

이벤트





제품사양
적용사례
기술자료

 


Bolt Tension Meter


TI-MINIMAX


The TI-MINIMAX, Ultrasonic Bolt Tension Monitor (Extensometer), defines the state of the art in the measurement of the actual elongation produced by tightening a threaded fastener. The TI-MINIMAX can measure the elongation very accurately in fasteners of virtually any material from 1/2 inch to 4 feet in length. The measurement is achieved by determining the change in the transit time, of an ultrasonic shock wave along the length of the fastener as the fastener is tightened by any method. The on-board microcomputer automatically interprets this time measurement to display the time(nanoseconds), elongation, load, stress, or %strain from stretching a fastener.

Features

-The first cost effective ultrasonic solution available on the market.
- Visually compare the unloaded to the loaded waveform.
- Display Options - RF, Rectified, Large Digits with Limits Bar.
- Effectively monitor your bolts during periodic shutdowns over the service life of the fastener.
- Measurement quanities - Time (nanoseconds), Elongation, Load, Stress, and %Strain.
- Display Resolution - 1/8" VGA 240 x 160 pixels.
- Stores 8000 readings and waveforms in multiple groups.
- Built-in Linear regression or vector for optimizing load measurements.
- The Auto Set feature automatically optimizes detection and adjusts display.
- Hi/Lo alarm tolerance limits work in conjunction with the data port and external pump shut-off device.






Specifications

Measuring RangeFrom 1” to 48” (25.4mm to 122cm) bolts
TimeNanoseconds
ElongationChange in length (inches/millimeters)
LoadForce load applied (pounds kIP or kN Killonewtons)
StressForce for unit area stress applied (pounds kPSI or megapascals MPa)
Strain %percentage strain applied (inches per inch or millimeters per millimeter)
Resolution+/- .00001 inches (0.0001 mm)
Velocity Range.0492 to .3936 in/ms
1250 to 9999 meters/sec
CalibrationFixed, Single, and Two point zero calibration options.

Select bolt material types from a preset or custom list.

UnitsEnglish & Metric / Fahrenheit & Centigrade
Measuring ModesPulse-Echo (standard)
Pulse-Echo w/Gate (fine adjust)
PulserSquare wave pulser with adjustable pulse width (spike, thin, wide)
ReceiverManual or Auto Set gain control with 40dB range
Timing10 bit 250 MHz digitizer
Display ModesA-Scan - Rectified +/- (half wave view), or RF (full waveform view)
Alarm LimitsSet hi and lo tolerances with audible beeper, viewable scan bar, and visual LEDs
Data Logger (Internal)Total of 8,000 readings, multiple bolt groups. Stores both waveform views, nanoseconds, elongation, load, stress, and strain for each reading
Memory16 megabit non-volatile ram
TransducerSingle Element (1 to 10 MHz & 1/8” to 1” diameters)
Transducer Cable Lenght10 foot (custom lengths available, inquire)
Temperature Probefor automatic temperature compensation
Setup Memory64 custom user defined setups. Factory setups can also be edited by the user
GateGate used to fine adjust where the detection point occurs
Auto SetLocates the detection signal, optimizes the gain setting, and adjusts the overall display to show the waveform and detection point automatically
Field CalibrationVector & linear regression. Includes Factory calibration traceable to national standards
PowerThree 1.5V alkaline or 1.2V NiCad AA cells.

Typically operates for 150 hours on alkaline and 100 hours on NiCad (charger not included.)

DimensionsWidth (2.5in/63.5 mm)
Height (6.5 in/165 mm)
Depth (1.24 in/31.5 mm)
Weight13.5 ounces (with batteries)
Operating Temperature14 to 140F (-10C to 60C)

Complete Kit
The TI-MINIMAX is supplied as a kit including Gauge, 2 AA batteries, 4 oz. Bottle of Couplant, RS232 Transfer Cable, Lemo to DB9 M/F 10' Lemo to Microdot Transducer Cable, Windows Utility Software Carrying Case, Operation Manual.

Measuring probes are not included.







* 전화주문 : 031-704-2401 팩스주문 : 031-704-2421 메일주문 : aaa@a-a.co.kr

  입금계좌 : 국민은행 298737-04-004838  예금주 :아이에스테크주식회사


*카드결제는 홈페이지 상에서 지원되지 않습니다. 카드결제를 이용하실 분들은 031-704-2401로 연락 바랍니다.
 
     

DELIVERY

  • 배송 방법 : 택배 & 화물
  • 배송 지역 : 전국지역
  • 배송 비용 : 4,000원
  • 배송 기간 : 3일 ~ 7일
  • 배송 안내 :

    - 배송료 : 10만원 미만시 착불 발송 됩니다.

      배송여건이 어려운 섬지방의 경우와 제품의 무게등 배송상의 문제로 인해 배송비용은 추가 될 수 있습니다.

    - 퀵서비스 요청시 착불 배송이 원칙 입니다.

    - 택배 마감 시간은 오후 4시 입니다.

EXCHANGE INFO

- 물품 파손 및 기능상의 이상이 있을경우 즉시 당사로 연락하여 사고 접수 바랍니다.


- 재고품목의 단순 변심 및 사양변경에 따른 경우 왕복 배송비가 부담 됩니다.


- 수입발주품 및 주문제작품은 반품 및 교환이 원천 불가 하오니 주문시 충분한 사양 검토 바랍니다.

SERVICE INFO

A/S 서비스 신청은 신청서 다운로드 후 내용작성 후 동봉하여 발송 바랍니다.

게시물이 없습니다

글쓰기 목록

게시물이 없습니다

글쓰기 목록

HOME  COMPANY  AGREEMNET  PRIVACY  GUIDE

298737-04-004838

국민은행 / 아이에스테크주식회사

       

저희 쇼핑몰은 KG이니시스를 통해 안전거래를 위해
현금 등으로 결제시 구매안전서비스를 이용하실 수 있습니다