초음파 두께 측정기
T-Mike EM
The StressTel T-Mike EM thickness gauge. Innovative packaging and increased performance without sacrificing simplicity. The T-Mike EM gauges are packaged in an environmentally sealed armored case ergonomically designed for single hand operation. Automatic Probe Zero with no probe zero block and Automatic Gain Control further support StressTel's goal of providing very capable yet simple to use instruments. The ultrasonic performance of the T-Mike EM is unrivaled by its competitors - stable readings are achieved in carbon steel from .025" to 20" thick. With additional features like Alarm, Differential Thickness, and Minimum Thickness Scan modes, the T-Mike EM provides outstanding value at a reasonable price. Product Features- Packaging
- Rugged Armored Case
- Ergonomically designed to fit comfortably in an operator hand with and without gloves for single hand operation
- Environmentally sealed housing Battery cassette with radial o-ring seal Integrated case gasket O-ring seals on hardware and connector penetrations
- Tactile sealed membrane keypad with direct access to preferred operator functions
- Lightweight 11 oz. With batteries
- High contrast backlit display with large, easy to read digits
- Utility
- Automatic continuous probe zero with no probe zero block
- Manual and Automatic Gain Control (AGC)
- Automatic Probe Recognition
- Single or two point calibration modes
- Adjustable sound velocity for simple calibration
- 25Hz Scan mode with minimum thickness capture
- Hi and Low limit alarm
- Differential Measurement Mode
- Auto Shut Off
- Performance
- Extended measurement range with new composite probe
- 025" to 20.00" actual measurement range depending on probe type and application
-
Operating Principle | Ultrasonic pulse-echo measurement | Thickness Measurement Range | 0.025 inches to 19.999 inches - material and application dependent (0,635 mm to 508 mm) | Display Resolution | 0.001 up to 9.999 inches, 0.01 above (0,01 up to 99,99 mm, 0,1 above) | Reading Stability | Nominal measured value +/- 0.001 inch | Probe Zero | Performed automatically by measuring the transducer interface echo. | External Dimensions | 3.00 inches wide (76 mm) 5.75 inches long (146 mm) 1.35 inches deep (35 mm) | Gain Adjustment | Selectable as AUTO, HI, MED, or LOW. | V-Path Correction | Automatic, microprocessor controlled. | Storage Temperature | -40°C to +60°C (-40°F to +140°F) without batteries | Operating Temperature | -10°C to +50°C (10°F to +120°F) | Power Requirements | Two 1.5V Alkaline batteries, size AA. | Measurement Rate | 4 Hz (in normal thickness measurement mode) 16 Hz (in scan mode) | Weight | 10.6 ounces (300 grams) with batteries. | Display Update Rate | 4 Hz | Warranty Term | All thickness gauges have a full two year warranty on parts and labor excluding batteries, transducers, and cables. |
| Kit Content- T-Mike EM Instrument
- Two 1.5V AA Alkaline Batteries
- Hard Shell Carry Case
- 063-200-101 Transducer
- Couplant
- Operating Manual
- Certificate of Calibration
|
|