제품사양 적용사례 기술자료   Moisture Sensor for Bins, Chutes and Conveyor Belts The Hydro-Probe was the first moisture sensor to use the digital microwave moisture measurement technique. It has integral signal processing which provides a linear output (both digital and analogue) and it can easily be connected to any control system. Typical applications include sand, cement, concrete, asphalt and aggregates. For organic materials the Hydro-Probe XT is recommended. Designed for use in processing plants which use bins (silos), chutes and conveyor or feed belts, the sensor is positioned into the flow of material. Measurements are taken 25 times per second as the material passes over or around the sensor face, meaning that the sensor can rapidly detect changes in moisture levels. Real time adjustments to the moisture content of the material can then be made during processing if required. This ensures that the manufacturer can continually produce a consistent, quality product and reduce costs by limiting the amount of wasted or spoilt materials. The sensor can be installed in a variety of locations where there is a flow of material. Some typical examples can be found on our installations page. A range of accessories are available including extension mounting sleeves and clamp rings to assist with fitting. [Features] [Connections] [Input / Output Connections] [Typical Examples for Mounting]                                                      [Aggregate Bin]                                                [Conveyor Belt in a Clay Brick Factory]

* Specifications

The Hydro-Probe is a rugged, digital, microwave sensor designed to measure moisture in flowing materials.

Typical applications include moisture measurement in abrasive materials such as sand, aggregates and concrete.

Construction :

Body : Stainless Steel.

Faceplate : Ceramic.

Fixing : The sensor must be placed in the flow of material.

Bins and Silos :  Install in the neck of a bin or underneath the gate. Standard and Extension Mounting Sleeves are available to suit different bin widths.

Conveyors :  Secure in the flow of material

Analogue Outputs :

2 Configurable 0 to 20mA or 4 to 20mA current loop source available for moisture and temperature.

May also be converted to 0 to 10V DC.

Digital Inputs/Output :

2 configurable digital signals are provided for batch average start/stop or for moisture/temperature multiplexing purposes.

Digital (Serial) Communications :

Opto-Isolated RS485 2-Wire port.

Uses Hydro-Com communications protocol for read/write access to sensor parameters and values.

Ethernet and USB interfaces are also available.

Moisture Range : The sensor will measure up to saturation of material.

Material Penetration : Approximately 75 to 100mm dependent on material.

Operating Temperature : 0 to 60°C

The sensor will not measure in ice.

Refresh Rate : Outputs are updated 25 times per second.

Connections : 

The sensor is fitted with a 10-way MIL-SPEC connector.

A 4, 10 or 25 metre, 6 twisted pair cable pre-assembled for connection to a waterproof junction box is available.

Power Supply : +15Vdc to +30Vdc. 4W.

* 전화주문 : 031-704-2401 팩스주문 : 031-704-2421 메일주문 : aaa@a-a.co.kr

  입금계좌 : 국민은행 298737-04-004838  예금주 :아이에스테크주식회사

*카드결제는 홈페이지 상에서 지원되지 않습니다. 카드결제를 이용하실 분들은 031-704-2401로 연락 바랍니다.
 
     

DELIVERY

• 배송 방법 : 택배 & 화물
• 배송 지역 : 전국지역
• 배송 비용 : 4,000원
• 배송 기간 : 3일 ~ 7일
• 배송 안내 :

  - 배송료 : 10만원 미만시 착불 발송 됩니다.

    배송여건이 어려운 섬지방의 경우와 제품의 무게등 배송상의 문제로 인해 배송비용은 추가 될 수 있습니다.

  - 퀵서비스 요청시 착불 배송이 원칙 입니다.

  - 택배 마감 시간은 오후 4시 입니다.

EXCHANGE INFO

- 물품 파손 및 기능상의 이상이 있을경우 즉시 당사로 연락하여 사고 접수 바랍니다.

- 재고품목의 단순 변심 및 사양변경에 따른 경우 왕복 배송비가 부담 됩니다.

- 수입발주품 및 주문제작품은 반품 및 교환이 원천 불가 하오니 주문시 충분한 사양 검토 바랍니다.

SERVICE INFO