제품사양 적용사례 기술자료   Microwave Moisture Sensor for Mixers and Conveyors The Hydro-Probe Orbiter is a digital microwave sensor designed specifically to measure moisture and temperature in fast flowing abrasive materials. With a choice of mounting options for static pan, rotating pan and planetary mixers the sensing head moves easily through  the mix providing accurate moisture measurement of the material in real time. Originally supplied to the concrete industry, the Hydro-Probe Orbiter can also be mounted as a static sensor underneath a bin  or above a belt conveyor and is therefore easily adaptable for use in other industries such as sand, aggregates, cereal, animal feed and fish meal. The Hydro-Probe Orbiter consists of 2 parts - the head unit which houses the electronics and connections and the sensing arm with a hard wearing ceramic. Both the sensing arm and the head unit can be easily changed eliminating the need to replace the entire sensor. To extend the life of the Hydro-Probe Orbiter, the sensing arm should always be fitted with an arm guard and protection rings. [Features] [Connections] [Input / Output Connections] [Rotating Connector] [Typical Examples for Mounting]                  [Static Pan Mixer]                            [Rotating Pan Mixer (L) and on an Aggregate Conveyor (R)]

* Specifications

The Hydro-Probe Orbiter is a rugged, hard wearing, digital moisture sensor that has been designed for use in mixers. 

It can be static mounted for rotating pan mixers or conveyor belt applications, or can be used as a rotating sensor, fitted to the mixer arm in static pan mixers.

Construction :

Body : Stainless Steel.

Sensing Face : Ceramic.

Fixing : The sensor is designed to be clamped to a vertical 25mm square mild steel bar (supplied by the customer).

Analogue Outputs :

2 Configurable 0 to 20mA or 4 to 20mA current loop source available for moisture and temperature.

May also be converted to 0 to 10V DC.

Digital Inputs/Output :

2 Configurable digital signals are provided for batch average start/stop or for moisture/temperature multiplexing purposes.

Digital (Serial) Communications :

Opto-Isolated RS485 2-Wire port.

Uses Hydro-Com communications protocol for read/write access to sensor parameters and values.

Ethernet and USB interfaces are also available.

Moisture Range : The sensor will measure up to saturation of material.

Material Penetration : Approximately 75 to 100mm dependent on material.

Operating Temperature : 

The Standard Hydro-Probe Orbiter Operates to a Temperature : 0 to 60ºC.

The High Temperature Arm will Work in Materials with a Temperature : Up to 100ºC as Long as the Electronics can be Kept to a Temperature of 60ºC.

The sensor will not measure in ice.

Refresh Rate : Outputs are updated 25 times per second.

Connections :

The sensor is fitted with a 10-way MIL-SPEC connector.

A 4, 10 or 25 metre, 6 twisted pair cable pre-assembled for connection to a waterproof junction box is available.

Power Supply : +15Vdc to +30Vdc. 4W.

* 전화주문 : 031-704-2401 팩스주문 : 031-704-2421 메일주문 : aaa@a-a.co.kr

  입금계좌 : 국민은행 298737-04-004838  예금주 :아이에스테크주식회사

*카드결제는 홈페이지 상에서 지원되지 않습니다. 카드결제를 이용하실 분들은 031-704-2401로 연락 바랍니다.
 
     

DELIVERY

• 배송 방법 : 택배 & 화물
• 배송 지역 : 전국지역
• 배송 비용 : 4,000원
• 배송 기간 : 3일 ~ 7일
• 배송 안내 :

  - 배송료 : 10만원 미만시 착불 발송 됩니다.

    배송여건이 어려운 섬지방의 경우와 제품의 무게등 배송상의 문제로 인해 배송비용은 추가 될 수 있습니다.

  - 퀵서비스 요청시 착불 배송이 원칙 입니다.

  - 택배 마감 시간은 오후 4시 입니다.

EXCHANGE INFO

- 물품 파손 및 기능상의 이상이 있을경우 즉시 당사로 연락하여 사고 접수 바랍니다.

- 재고품목의 단순 변심 및 사양변경에 따른 경우 왕복 배송비가 부담 됩니다.

- 수입발주품 및 주문제작품은 반품 및 교환이 원천 불가 하오니 주문시 충분한 사양 검토 바랍니다.

SERVICE INFO