The documenting Eurotron MicroCal 20 DPC process calibrator is a handheld, high accuracy, multifunction process calibrator. General features of the Eurotron MicroCal 20 DPC process calibrator include: dual (simultaneous IN-OUT or simultaneous IN-IN) insolated channels, two internal pressure sensors, external pressure modules, automatic calibration procedure, large graphics, and backlit display.

Dual Input Channels

Both channels (CH1 and CH2) can be set for simultaneous input. You can use the Eurotron MicroCal 20 DPC process calibrator as a two channel high accuracy thermometer for TCs and RTDs certification.

4-Wire Resistance Thermometer

Resistance and temperature with resistance thermometer may be measured on a 2, 3, and 4 wire connections for best accuracy and resolution (0.01°F). The Eurotron MicroCal 20 DPC process calibrator is compatible with pulsed transmitters.

Rj Compensation

The Eurotron MicroCal 20 DPC process calibrator has accurate and fast response compensation through a special low thermal capacity design of binding posts, which incorporates a thin film high accuracy Pt100 as cold junction reference. The internal reference allows the maximum accuracy for the 15 to +130°F temperature range. A remote Pt100 sensor can be connected to the Eurotron MicroCal 20 DPC process calibrator for special application (from 15 to +212°F). It is possible to set manually the compensation temperature (from -60 to +212°F) by keyboard.

Frequency - Counts

The Eurotron MicroCal 20 DPC process calibrator's simulation mode is designed to generate a zero-based square pulse, with an adjustable amplitude, at a frequency up to 20 KHz. A preset number of pulses may be programmed and transmitted to test or calibrate totalizers and counters. The Eurotron MicroCal 20 DPC process calibrator can be configured to measure frequency and count pulse (totalizer mode). Technical units in Hz, pulse/h, and pulse/m. The threshold is adjustable from 0 to 20 V with 0.01 V resolution.